• • Suitable for wall thickness 100125 mm brick/ block.
    • 3 mm diameter wire.
  • • 60 mm wide.

Ancon AMR is a welded wire ladder type reinforcement, manufactured in 2700 mm standard lengths, used to improve the structural performance of masonry walls, in accordance with BS 5628-2: 2005, by providing additional resistance to lateral loads e.g. wind. It can also be used to reduce the risk of cracking either at stress concentrations around openings or as a result of movement, in accordance with BS 5628-3: 2005.

AMR is available in four standard widths, 60, 100, 150 and 175 mm and is suitable for walls 100215 mm thick.

The product is manufactured from five wire sizes which, after flattening, have an equivalent wire diameter of 3, 4 and 5 mm. Longitudinal wires have a minimum characteristic yield strength of 500 N/mm.

Ancon AMR is available in austenitic stainless steel and galvanized steel. Galvanised steel is not suitable for use in the external leaf of a cavity wall.

Ancon AMR-CJ is used to tie the two leaves of thin masonry together, so it acts as a single unit. The product consists of flat ties welded to flattened longitudinal wires. Manufactured in stainless and galvanised steel, AMR-CJ is supplied in a standard width of 175mm to suit a wall width of 215mm comprising of either standard bricks or 100mm blocks.

Ancon AMR-X features shaped cross wires which ensure the longitudinal wires are located in the centre of a bed joint, which help ensure an adequate bond, accelerates construction and improves build quality.