With a thermal conductivities as low as 0.024 W/m·K, Kingspan TR27 is used to insulate flat roofs waterproofed with fully adhered single-ply, partially bonded built-up felt, mastic asphalt and cold liquid applied waterproofing.

• Amongst the more thermally efficient insulation products for flat roofs
• Fully compatible with single-ply non-bituminous membranes that are fully bonded with solvent-based adhesive systems
• Fully compatible with most bitumen based and mastic asphalt waterproofing systems
• Compatible with most green roof systems
• Thermaroof TR27 has a Euroclass rating of F.

• Thermaroof TR27 has a thermal conductivity of:

- 0.027 W/mK (insulant thickness < 80 mm)- 0.025 W/mK (insulant thickness 80 - 119 mm)- 0.024 W/mK (insulant thickness 120 mm

Please note: this pack contains 2x 1200mm x 1200mm sheets.

Properties

Length: 1.2m
Width: 1.2m
Thickness: 150mm
Pack quantity: 2x sheets
Pack coverage: 2.88m2
Thermal conductivity:
80mm to 119mm - 0.025 W/mK
120mm and above - 0.024 W/mK
Facings: coated glass tissue
Compressive strength: 150kPa at 10% compression

Features

• High performance rigid thermoset insulation thermal conductivities as low as 0.024 W/m.K.
• LPCB approved to LPS 1181: Part 1.
• FM approved for Class 1 steel deck roof assemblies.
• Fully compatible with singleply nonbituminous membranes that are fully bonded with solvent based adhesive systems.
• Fully compatible with most bitumen based and mastic asphalt waterproofing systems.
• Compatible with most green roof systems.
• Resistant to the passage of water vapour.
• Easy to handle and install.
• Ideal for new build and refurbishment.
• Nondeleterious material.
• Manufactured with a blowing agent that has zero ODP and low GWP.

KINGSPAN SPECIAL ORDER
Please note that all Kingspan products are non-stock,
and once ordered cannot be amended. These products
are non returnable and must be taken in full.